Microsoft Security Essentials – new anti-virus software free for genuine Windows users!

Microsoft announced a new reason to own genuine Windows software - free anti-virus and anti-malware software from Microsoft! Microsoft Security Essentials available for genuine Windows PCs at no cost. This mean, you must validate you copy of Windows before you can use it.

About Microsoft Security Essentials

Microsoft Security Essentials provides real-time protection for your home PC that guards against viruses, spyware, and other malicious software.

Microsoft Security Essentials is a free* download from Microsoft that is simple to install, easy to use, and always kept up to date so you can be assured your PC is protected by the latest technology. It’s easy to tell if your PC is secure — when you’re green, you’re good. It’s that simple.

Microsoft Security Essentials runs quietly and efficiently in the background so that you are free to use your Windows-based PC the way you want—without interruptions or long computer wait times.

Key Features

• Comprehensive malware protection
• Simple, free download*
• Automatic updates
• Easy to use

Installation

Download here: http://www.microsoft.com/security_essentials/


You must validate your copy of Windows to pass genuine before install it.


After validation, click Install button.

Now, you can use and enjoy it!

Free VMWare Server Serial Numbers or License Keys

VMware is a great virtualization technology. Unfortunately, VMware is not free, to use it legally you must purchase. Today, you can get VMWare Server free serial number or product key, simply complete this registration. You can get for free up to 100 serial numbers at one go without any charges or fees. If you read this inforamtion, please announce to everyone who needed. I have get 10 product keys for VMware Server. Hix, although i don't need up to 10 keys concurrently. If you need, you can leave an email, i will send key to you.

Create and Attack a Virtual Hard Disk in Windows 7

In Windows Server 2008 R2 and Windows 7, you can create and attack a virtual hard disk to the computer as physical hard disk. It is true, today i will show you how to do it.

STEP 1: You must know that Virtual Hard Disk create only on a boot partition, in many case boot partition is C: driver. I create a virtual hard disk in my computer that installed Windows 7, also you can create it in Windows Recovery mode when you choose boot from Windows 7 DVD. The difference between two methods is when you boot from Windows 7 DVD, you must press Shift + F10
or boot into the Command Prompt from the Start Recovery Options screen (see screenshot below)

STEP 2: You type Diskpart in command prompt and press Enter.

To create a VHD file, you have two options. First, create a fixed VHD file that allocate the entire maximum size that you set for the VHD file (command below allocate 20GB for the VHD file):

create vdisk file=C:\Windows7.vhd maximum=20480

Second, create a Expandable VHD file that store only as large as the amount of data that is saved in the VHD file. by execute the following command:

create vdisk file=C:\Windows7.vhd maximum=20480 type=expandable

STEP 3: To attack a VHD file to your computer, you must select this vdisk and attack it by execute these commands:

select vdisk file=C:\Windows7.vhd
attack vdisk

STEP4: Verify
Now, you can insert a Windows media, maybe Windows 7 DVD to install it, you have a new disk. It is the VHD file that you have created.

Finally, you can download this video to more detail (this video is created by Keith Combs): Download here.

Disable Cut, Paste, Copy, Delete, Renaming Files and Folders with Prevent

You probably worry about your important personal data that could be accidentally deleted or renamed when your computer is being used by your kids or some third parties. If you are looking for any solution which can prevent data from being messed up or lost due to delete or rename action, then Prevent will be able to help you on this.

Prevent is a freeware and it is designed to disable cut, paste, copy, delete and rename functionality in your computer. As mentioned earlier, the main objective is to prevent anybody from deleting, renaming or messing around your data. Once you have run the installer, it will create a Prevent folder under system Program Files folder which contains Prevent.exe, Pre_1.exe, Pre_2.exe, Read Me First.txt, Uninstall.ini and Uninstall.exe. To run the program, you need execute Prevent.exe and it will display a window for you to define a hotkey. This hotkey is used to stop Prevent process and click Activate button once you have defined the hotkey. As soon as this program is activated, it will run at background silently and functions like cut, paste, delete and rename will be disabled regardless if they are initiated from keyboard button (Ctrl C, Ctrl X, Ctrl V, Delete), from right click context menu or under Edit menu. On top of this, it also takes the consideration to prevent data loss caused by terminating program without saving. As such, End Process button at Task Manager is disabled as well so that it doesn’t allow you to right click on process name and click on end process. To restore the setting, just use the hotkey you have defined earlier to stop the process.

Prevent ver 1.0 is absolutely free to download and it works well on Windows 2000/2003/2008/XP/Vista/7.

Source: mydigitallife

Basic Switch Configuration

In semester 3 of the CCNA course. You will learn about Switching. I have learned chapter 2 in this semester and today i post this lab "Basic Switch Configuration" that i learned in my CM-Group. Lab is show in figure below.








As you can see in the figure: IP address, network segment, 2 VLAN on 2 Switch. Here is requirement:
1. Configure IP address for 2 interfaces on ROUTER with IP address in the figure.
2. Configure basic secure on 2 Switch: enable Telnet, Console port, password Switch, turn off domain lookup.
3. Configure interface Vlan1 on 2 Switch.
4. Configure Port-Security
- On Fa0/1, Fa0/2, Fa0/3 of Switch S1: enable port-security, configure sticky mode with maximum 2 mac-address, violation is shutdown.
- On Fa0/4, Fa0/5, Fa0/6 of Switch S2: enable port-security, configure port-security map mac-address of each PC that attached into S2, violation is restric.
5. After verify everything which configured. You must copy running-config to startup-config and copy running-config to TFTP server.
Here is my instruction to configre port-security:
In S1:
Go to interface Fa0/1, other interfaces is similar:

S1#switchport mode access //allow access to this port
S1#switchport port-security //enable port-security
S1#switchport port-security maximum 2 //set maximum of 2 mac-address
S1#switchport port-security mac-address sticky //enable port-security with sticky mode
S1#switchport port-security violation shutdown //shutdown this port if have a third mac-address is pluged

In S2:
Go to interface Fa0/4, other interfaces is similar:

S2#switchport mode access
S2#switchport port-security
S2#switchport port-security mac-address type MAC Address of PC04
S2#switchport port-security violation restric

To verify port-security uses this command in EXE mode: show port-security interface fa0/1

Any comments are welcome!

Download Windows 7 Enterprise with 90-Day Trial

This is trial software designed for IT Professionals interested in experiencing the Windows 7 Enterprise on behalf of their organization so please read the following to get an idea of the risks and key things you need to know before you install.

We do not recommend that you install this if you are a not an IT Professional or not professionally managing corporate networks.

Guidelines on usage:

* Protect your PC and data. Be sure to back up your data and please don’t test Windows 7 on your primary home or business PC.
* You have 10 days to activate the product. If not activated within 10 days, the system will shut down once every hour until activated. Unsure on how to activate? Visit our FAQ.
* The 90-day Trial is the full working version of the Windows 7 Enterprise, the version most of you will be working with in your corporate environment. It will not require a product key (it is embedded with the download).
* The 90-day Trial will shut down once every hour when you have reached the end of the 90-day evaluation period.
* The 90-day Trial is offered for a limited time and in limited quantity. The download will be available through March 31, 2010, while supplies last.
* After the 90-day Trial expires, if you wish to continue to use Windows 7 Enterprise, please note that you will be required to purchase and perform a clean installation of Windows 7, including drivers and applications. Please keep this in mind; Windows 7 Enterprise is not available through retail channels.
* Technical details/updates/questions: Please review our FAQ or visit the Windows 7 support forum.
* Stay informed. You can keep up with general technical information and news by following the Springboard Series blog. Want technical guidance, tips, and tools? Visit the Springboard Series on TechNet.
* Keep your PC updated: Be sure to turn on automatic updates in Windows Update in case we publish updates for the 90-day Trial.
* Microsoft Partners-: Learn more about Windows 7 on the Microsoft Partner Portal.

Minimum System Requirements*:

* 1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB of RAM (32-bit) / 2 GB RAM (64-bit)
* 16 GB available disk space (32-bit) / 20 GB (64-bit)
* DirectX 9 graphics processor with WDDM 1.0 or higher driver
* DVD-compatible drive
* Internet access (fees may apply)

*Note: Some product features of Windows 7, such as the ability to watch and record live TV, BitLocker, or navigation through the use of “touch,” may require advanced or additional hardware. Windows XP Mode requires an additional 1 GB of RAM and 15 GB of available disk space; and a processor capable of hardware virtualization, with Intel VT or AMD-V turned on.

Download Windows 7 Enterprise free 90-day trial version from http://technet.microsoft.com/en-us/evalcenter/cc442495.aspx. You must have a hotmail to download
Download it and enjoy!

Discounted Microsoft Exam up to 25% [wow]

Today, i receive email from Prometric. This email talking about: Microsoft Career Offer up to 25% of Microsoft Exam. This is my email that i received

	It's never been a more important time to take control of your destiny and chart your career path. To help you pursue a new career in IT, move from one job role to another, or help you become indispensable in your existing role, Microsoft wants to help advance your career by providing you discounts on select Microsoft Certification Exams. Microsoft Certifications are continually evaluated and updated to ensure their relevance in the marketplace. As a result, earning a certification not only helps you stay up-to-speed on the latest developments in Microsoft technologies and platforms, but enables you to demonstrate to employers your on-the-job skills. Learn More about Microsoft Certifications Get Your Voucher Code for your Discounted Exams Register and obtain your discounted voucher code at http://www.prometric.com/microsoft/careeroffer/. Once you have obtained your code, plan and schedule your next exam by visiting http://www.prometric.com/Microsoft/default.htm.		Offer Good until December 31, 2009 or while supplies last. Candidates must register, schedule and take their discounted exams by December 31, 2009. Microsoft does not guarantee that candidates that take exams will pass.